De-brick your WRTSL54GS Router

Discussions about Embedding Linux on Linksys Routers

De-brick your WRTSL54GS Router

Postby gatekeeper » Sun Feb 25, 2007 11:32 pm

Hi Rebels,

I had to bricked my WRTSL54GS and after a few tries was able to get it working by shorting pins 5 & 6 on the Intel chip inside.

Steps:

1. turn off power
2. short pins 5 & 6
3. plug in the power while the pins are shorted
4. you should be able to ping -t 192.168.1.1
5. tftp -i 192.168.1.1 put [bin file]

Note: I also had to clear my arp table

Keep in mind it voids the warranty by having to open it but in my case I do not care.

regards,
Gatekeeper
gatekeeper
Site Admin
 
Posts: 3
Joined: Mon Apr 13, 2009 6:47 pm

Return to Linksys Routers



Who is online

Users browsing this forum: No registered users

cron